Technical Data.
Sheet-feed press UNIPRESS
The sheet-feed press UNIPRESS consists of a sheet feeder with hydraulically driven elevating table, an oil application system (as an option), a NC-driven sheet feed and a press with its toolings. Thanks to its modular construction, the press is suitable for the production of twist-off caps, round and non-round ends as well as deep drawn cans.
| UNIPRESS 320 for the production of deep-drawn cans |
|
|---|---|
| Press force | 320 kN |
| Depth of draw | 3–28 mm |
| Number of strokes/min* | 80–225 |
| Sheet size max | 1100x1100 mm |
| Sheet size min | 650x650 mm |
| Sheet thickness | Fe 0.14–0.49 mm Al 0.15–0.35 mm |
| UNIPRESS 320-RPT** for the production of deep-drawn cans |
|
|---|---|
| Press force | 320 kN |
| Depth of draw | 28–55 mm |
| Number of strokes/min* | 80–140 |
| Sheet thickness | Fe 0.14–0.49 mm Al 0.15–0.35 mm |
* depending on cutting diameter, deep-draw shape and sheet size
** redraw, panelling and trimming functions
Subject to modifications
** redraw, panelling and trimming functions
Subject to modifications