Technical Data.
Sheet feet press UNIPRESS
The sheet feed press UNIPRESS consists of a sheet feeder with hydraulically-driven elevating table, an oil application system (as an option), an NC-driven sheet feed and a press and its toolings. Thanks to its modular construction, the press is suitable for the production of twist-off caps, round and non-round ends as well as deep drawn cans.
| UNIPRESS 320 for the production of components |
|
|---|---|
| Press force | 320 kN |
| Depth of draw | 3-28 mm |
| Number of strokes/min* | 80–225 |
| Sheet size max. | 1100 x 1100 mm |
| Sheet size min. | 650 x 650 mm |
| Sheet thickness | Fe 0.14–0.49 mm Al 0.15–0.35 mm |
| UNIPRESS 800 for the production of components |
|
|---|---|
| Press force | 800 kN |
| Depth of draw | 3–28 mm |
| Number of strokes/min* | 80–225 |
| Sheet size max. | 1100 x 1100 mm |
| Sheet size min. | 650 x 650 mm |
| Sheet thickness | Fe 0.14–0.49 mm Al 0.15–0.35 mm |
* depending on cutting and sheet size
Subject to modifications
Subject to modifications